Polini Front Wheel Mounting Kit for Piaggio Zip

Once the 60 mph barrier is exceeded on Piaggio Zip SP models using the front SIS arm there is quite a lot of vibration from the front end. This is caused due to the needle roller bearing system within the front hub. Polini’s R & D team have come up with a clever new part designed to remove all vibrations on speeds up to 100 mph.
AD/290.0122

Polini Output Shaft for Piaggio 2T 50cc Engines

Another part aimed at those serious Piaggio Zip racers is the new output shaft designed to be used with Polini gear kits. The internal shaft is now hollow to save weight however the new case hardened material means that it is actually stronger than the original. The very end of the shaft has also been extended to make fitting of the Polini Torsen bars easier and quicker which is ideal if the weather takes a turn just before your race.
AD/202.1410

Polini Engine Mounting Swing Arm for Piaggio Zip

One of the latest products now available from the Polini factory is this new swing arm for Piaggio Zip 50cc 2T models. This new support uses two bearings instead of the original silent block design. Not only does this make the frame stiffer and improve resistance under torsion situations it also changes the geometry and length of the scooter. With the length increased by 15mm entry speed can be improved into corners as the turn in is more precise and therefore the rider is able to go in faster. You can also get back on the throttle earlier as there is less chance of the front lifting; Polini’s technicians have seen much lower lap times when using the new swinging arm.
In stock soon for Piaggio Zip models – AD/150.2121

Airsal 153cc Cylinder Kit for Honda Dylan and Pantheon 125

Suitable for many Honda 125 and 150cc 4 stroke scooters the 153cc kit not only increases engine capacity but the forged piston is re designed to increase the compression ratio too. Acceleration and hill speeds will be increased along with a big torque gain which is ideal for carrying luggage or passengers.

AD/CYL21A - £122.40

Doppler Vortex 50cc Moped Cylinder Kits

The long awaited Doppler Vortex kits have finally arrived however only for Minarelli AM6 and Derbi D50B0 engines at the moment. It’s clear to see what all the hype was about once you have one in your hand. First of all the water jacket is huge covering more than the entire piston stroke which allows for a pretty aggressive port layout. The general quality of the cylinder head and barrel is second to none and a Vertex piston is used to complete it. With extreme cooling properties Doppler say this kit is designed for road use with low service intervals and we believe them!

Minarelli AM6 – AD/480587 - £174.00

Derbi D50B0 – AD/480588 - £174.00

Scooter Original Type Air Boxes

Teknix and Tun’R offer a complete range of original air boxes in black or white for the most popular scooters like the Yamaha Aerox or Peugeot Speedfight etc. When using the original carburettor we always recommend keeping your original air box instead of opting for an open sponge filter on a 50cc. These air boxes are perfect for just that as they replace damaged or tatty old air box units whilst keeping that all weather efficiency.

White air box for MBK Booster > 2003 etc - AD/473346 - £24.00
White air box for Peugeot Ludix 50cc models - AD/480265 - £24.00
White air box for Yamaha BWS 50 2004 > etc - AD/480263 - £24.00
Black air box for Peugeot Ludix 50cc models - AD/462540 - £22.80
Black air box for Gilera Runner 50 etc - AD/480267 - £18.75
White air box for Peugeot Trekker 50 etc - AD/480268 - £18.72
White air box for Yamaha Aerox etc - AD/480264 - £17.50
Black air box for Yamaha BWS 2004 > etc - AD/455407 - £16.55
Black air box for MBK Booster > 2003 etc - AD/375558 - £15.60
Black air box for Peugeot Speedfight 50 etc - AD/480266 - £15.60
Black air box for Yamaha Aerox etc - AD/372271 - £14.40

Scooter and Moped Fork Oil Seals

After many requests for fork seals we finally found the time and got a reasonably complete range in stock from Teknix for the majority of popular scooter and moped models on the market.

Click on the link: Fork Oil Seals to view the range. Prices from £4.55.

Doppler C4 Scooter and Moped Main Bearings & Seals

New in from Doppler are these exceptional C4 rated main bearings that are a must for any fast road or race setup. Each bearing has a polymer cage on one side to reduce friction which in turn reduces heat and allows for a longer life of the bearing. Each pack is supplied with two crankshaft oil seals too! In stock for many Piaggio, Minarelli, Derbi engines etc

Peugeot 50 / 70cc engines – AD/478936 - £25.20
Derbi EB050 / D50B0 50 / 80cc engines – AD/478942 - £28.80
Minarelli AM6 50 / 80cc engines – AD/478939 - £42.00
Piaggio 50 / 70cc engines – AD/478937 - £42.00
Minarelli 50 / 70cc engines – AD/478935 - £28.80